Standard Incubators
Bellco Glass, Inc. Single Window Roll-In Incubator, 115V
Bellco Roll-In Incubators have 40 cubic feet of volume and are designed for use with Bellco’s Cell Production Roller Apparatus (CPRA). The flush-to-floor design allows easy movement of the CPRA in and out of the chamber. Four internal convenience outlets allow simple connection to internally placed appliances such as CPRA, Roller Drums, Magnetic Stirrers, etc. Fans take air from the chamber top, pass it over the 1100 watt heater and re-inject it into the chamber on the bottom back wall. A microprocessor temperature controller and membrane keypad allows simple setting and monitoring of chamber temperature. A safety thermostat is included to prevent over-temperature failures. Shelf brackets are included for mounting of optional shelves. The control panel features indicating lights and dials for automatic control of temperature. MADE IN THE USA
Darwin Chambers Company Double Door Incubator 47 cu. ft.
The HT055-SS is a 50 cubic ft double door heated incubator. Temperature range is 5°C above ambient to 50°C degrees C. This unit comes with 6 epoxy coated shelves. Exterior is stainless Steel Front continuous coil coated sides with keyed lock. Stainless steel interior. Running the models below will save you up to 80% in electricity costs vs. a compressor unit from competitors.
Percival Scientific Biological Incubator, I36LL, 29.7 cu. ft., horizontal IncuWhite LED lighting, 4 tiers, 4-44° C ±0.5°, IntellusUltra controller
The I36LL incubator is frequently used for mosquitos and other insects, low light algae growth, or low cost seed germination. IncuWhite LEDs are dimmable between 5-100% output with up to 125 µmoles/m2/s irradiance @ 6” from the LEDs. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. Four white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. For additional options contact sales@percival-scientific.com for a free consultation.
Thomas Scientific Mini Digital Incubator with heating only 115V
Mini Digital Incubator with heating only 115V
Yamato Scientific America, Inc. Yamato 286L Incubator with window, Refrigerant, 220V
Low temperature 286L forced convection incubator applicable for low temperature tests and environmental tests. Designed with a large dual glass door and inner door that forms a triplex glass door for improved heat retention. Programmable. High accuracy temperature control and temperature distribution. Optional slide shaker table available to put in and take out samples easily. Operating temperature range: -10~ + 50° C
Memmert Natural Convection Incubator IN 750, 115 volt, 50/60 Hz, maximum temperature range to 80C
Memmert Natural Convection Incubator IN 750, 115 volt, 50/60 Hz, maximum temperature range to 80C
Sheldon Manufacturing Inc LABORATORY INCUBATOR 6CUFT
LABORATORY INCUBATOR, 6 CU FT, SS INTERIOR, INNER GLASS DOOR, OUTLET, ACCESS PORT, 115V. SHEL LAB general purpose incubators deliver a degree of temperature uniformity usually found only in more expensive, application specific models. This high level of performance is due to a precise microprocessor controller and a unique warm air jacket design. Triple wall construction allows heated air to circulate within an open plenum between the inner chamber and exterior walls. This design does not require blowers or fans within the incubator chamber where samples are susceptible to cross contamination and the drying effects of convection. Five strategically placed heating elements, including a heated outer door, ensure uniform heating, even when the incubator chamber is fully loaded. More information available at www.shellab.com
Yamato Scientific America, Inc. Yamato 143L Incubator with window, Refrigerant, 220V
Low temperature 143L forced convection incubator applicable for low temperature tests and environmental tests. Designed with a large dual glass door and inner door that forms a triplex glass door for improved heat retention. Programmable. High accuracy temperature control and temperature distribution. Optional slide shaker table available to put in and take out samples easily. Operating temperature range: -10~ + 50° C
Enterprise Technology Solutions Adesso 2.4 GHz Wireless Vertical Ergonomic Mouse
Adesso 2.4 GHz Wireless Vertical Ergonomic Mouse
Thomas Scientific Mini Digital Incubator with heating and cooling 230V
Mini Digital Incubator with heating and cooling 230V
Electron Microscopy Sciences Oven Incubator 240 V
This Oven/Incubator with an aluminum inner chamber, and venting will provide many years of long service in busy labs. The cast aluminum chamber provides for dependable temperature uniformity and the vent efficiently expels moisture and vapors. The unit has a magnetic latch that assures positive door closure and a thermometer port at the top of the oven that accommodates any partial immersion thermometer. The unit heats up rapidly (56 degree C in 9 minutes) and comes with a removable shelf.
Chemglass Life Sciences Incubator, 2.0 Cu. Ft., General Purpose, 120V
Microprocessor Control / Digital LEDInterior Glass Door with Radius Corner. Unique Warm Air-Jacket Design. Heated Tempered Safety Glass Door. One Interior Outlet. Access Port. No Rivets; Seam Welded Panels and Doors. 24 Month Limited Warranty. The CLS-2440 series of general purpose incubators deliver a superior degree of temperature uniformity. This design requires no blowers or fans within the incubator chamber. Five strategically placed heating elements, including a heated outer door, ensure uniform heating while the unique air jacket design eliminates hot spots when the incubator chamber is fully loaded. The microprocessor controller achieves exceptional temperature control with no overshoot. Set point and actual chamber temperature are digitally displayed. Temperature calibration is easily performed by touch pad control. A totally independent secondary temperature controller offers the added safety of oven temperature protection.
Jeio Tech Inc Jeio Tech™ IB4-15V, 146L Advanced Forced Convection Incubator (120V, 60Hz), PID Temperature Control, Temperature Temperature Ramp, Data Logging (RS-232/USB), Uniform Heating
Jeio Tech IB4-15V Advanced Incubator, Forced Convection with PID Control delivers precise, uniform temperature performance for biological and clinical applications. With excellent stability (±0.1°C fluctuation) and uniformity (±0.35°C variation at 37°C), it ensures consistent conditions for culture and testing. Rapid recovery restores 37°C within 5 minutes after a 30-second door opening. The advanced system features adjustable fan speed, temperature ramping, 3-point calibration, and a 5-inch touchscreen controller with real-time monitoring. RS-232/USB connectivity supports data logging and remote access. Built with a durable chamber and adjustable shelving, it offers reliable performance for research and pharma labs. Inner chamber: W 21.62" × D 14.8" × H 27.95".